PEMF Therapy: Finding the Sweet Spot of Gauss
PEMF Therapy: Finding the Sweet Spot of Gauss
When it comes to PEMF therapy, one question often comes up: how much magnetic field strength is enough?
You might see PEMF devices advertised with different outputs, measured in Gauss. Some offer relatively low intensities, while others can deliver several hundred Gauss. But does a higher Gauss figure automatically mean a better session?
Not necessarily.
The interesting part of PEMF therapy is understanding the relationship between magnetic field strength, frequency and treatment time – and why finding the right balance may be more important than simply choosing the highest setting.
First, what exactly is Gauss?
Gauss (G) is a unit used to measure magnetic field strength, more precisely magnetic flux density.
In PEMF therapy, it describes the strength of the pulsed magnetic field produced by the applicator.
For context:
1 Gauss = 100 microtesla (µT)
10 Gauss = 1 millitesla (mT)
100 Gauss = 10 millitesla (mT)
Different PEMF systems operate at different intensities, and research has explored a wide range of magnetic field strengths.
However, Gauss is only one part of the picture.
Is there a sweet spot for Gauss?
This is where things get interesting.
It can be tempting to assume that a stronger magnetic field must produce a better result. However, PEMF research suggests that the biological response can depend on several interacting factors.
These include:
Field strength (Gauss): How strong the magnetic field is
Frequency (Hz): How many pulses occur each second
Waveform: The shape and pattern of the magnetic pulses
Treatment duration: How long the body is exposed to the field
Applicator and placement: How the field is delivered to the area being treated
This means that the highest available Gauss setting is not automatically the most appropriate.
Researchers have explored the idea of a therapeutic window: a combination of settings that may produce a more useful response under particular conditions. The important point is that this window can vary depending on the device, the protocol and what is being investigated.
There is currently no single, universally established Gauss setting that has been proven to be the ideal for everyone.
The sweet spot is about finding an appropriate combination of settings, rather than simply turning the intensity up.

Why more Gauss doesn't necessarily mean better
Think of PEMF as a combination of settings rather than a volume control.
Increasing the Gauss changes the magnetic field strength, but it does not automatically make the programme more suitable.
A lower-intensity setting with a particular frequency and treatment duration may be appropriate for one application, while a different combination may be explored for another.
This is why it is important to look beyond the headline maximum Gauss figure when comparing PEMF devices.
It is also worth remembering that research findings from one PEMF device cannot automatically be transferred to another. Different applicators, coils, waveforms and treatment protocols can produce different exposures.
Understanding the iTechMedical Magneto PRO MAX
At Restore House, we use the iTechMedical Magneto PRO MAX system, which gives us flexibility in how PEMF sessions are delivered.
The system includes:
The Magneto PRO MAX control unit
The full-body OsteoMat
Two targeted applicators
63 programmes
Adjustable frequencies from 1–120 Hz
Two independent channels
The manufacturer specifies up to 200 Gauss per channel, with a maximum simultaneous output of 400 Gauss when both channels are used together in the specified configuration.
It is important to understand that this maximum figure does not mean the full-body mat delivers 400 Gauss uniformly across its entire surface. Field strength at the treatment area depends on the applicator, its design and how it is being used.
The OsteoMat is designed for full-body application, while the smaller applicators allow more targeted placement.
This combination gives the system flexibility for different session approaches.
Why frequency and duration matter too
Gauss is only one part of PEMF.
Frequency, measured in Hertz (Hz), describes how many pulses are delivered each second. A programme's frequency and intensity work together, rather than acting as completely separate measures.
Treatment duration also matters. A particular intensity delivered for a short period is not necessarily equivalent to the same intensity delivered for a much longer period.
This is one reason why PEMF research can be difficult to compare: studies often use different devices, settings, treatment schedules and participant groups.
Rather than assuming one setting is best, it is more useful to consider the complete programme.
What does this mean for your PEMF session?
At Restore House, our approach is to look at PEMF as a carefully configured wellness session, rather than focusing on the biggest number on a machine.
The Magneto PRO MAX gives us a choice of programmes and applicators, allowing sessions to be approached differently depending on the equipment being used and the individual's circumstances.
We believe it is important to understand what the settings mean, rather than assuming that maximum intensity is always the goal.
PEMF is an area of ongoing research. Although studies have explored potential applications in areas such as musculoskeletal health and wellbeing, the strength of evidence varies between conditions and devices. It should not be presented as a proven treatment or replacement for medical care.
Anyone with an implanted electronic device, who is pregnant, or who has a relevant medical condition should seek appropriate medical advice and check the device manufacturer's safety guidance before using PEMF.
Finding the balance
So, what is the sweet spot of Gauss?
It isn't necessarily the highest setting. It is understanding how field strength works alongside frequency, programme selection, applicator placement and treatment duration.
The most useful question isn't simply “How many Gauss does it reach?”
It is “What combination of settings is appropriate for the particular PEMF system and intended application?”
At Restore House in Sale, Manchester, we use the iTechMedical Magneto PRO MAX with its full-body OsteoMat and targeted applicators as part of our wider wellness offering.
Interested in discovering PEMF therapy?
Contact Restore House to find out more about our PEMF sessions and the technology we use.
Restore House – supporting your wellbeing through a considered, individual approach.

Practice Manager
Gemma Sanda
PEMF Practitioner

Comments